| Série de connecteur | EV |
|---|---|
| Estimation de tension | 12V-540V |
| Nom du produit | Connecteur hermétique d'EV |
| Type de montage | Boulons de fixation des bornes |
| Estimation actuelle | 30A |
| Matériel d'isolateur | De verre et en céramique |
|---|---|
| Produit de fabrication | Sscore |
| Estimation de tension | 12V-540V |
| Type de montage | Boulons de fixation des bornes |
| Estimation actuelle | 30A |
| Sleeve Hardness | HA 50-55 |
|---|---|
| Dielectric Strength | 3000VAC |
| Plate | 45 Steel |
| Product Type | Electric Vehicle Connector |
| Insulation Material | Glass And Ceramic |
| Nicke Plated | THICKNESS 2~4μm EXCEPT TABS |
|---|---|
| Application | Electric Vehicle Charging |
| Connector Series | EV |
| Pin Number | 3 |
| insulating material | Glass |
| Rated Current | 30A |
|---|---|
| Sealing Method | Hermetic Seal |
| Nickel Plated | THICKNESS ≥1μm EXCEPT TABS |
| Insulator Material | Glass |
| Type | Electric Vehicle Connector |
| Temperaturerange | -40°C To150°C |
|---|---|
| Operation Current | 25A |
| Application | Used For EV Charging Stations And Electric Vehicles |
| Plate | #45 STEEL |
| Type | Electric Vehicle Connector |
| Maximum Working Current | 30A |
|---|---|
| Numberofcontacts | 3 |
| Pins Materials | SUH446 STAINLESS STEEL |
| Ceramic Material | 95% AL2O3 |
| Ingressprotection | IP67 |
| Temperature Range | -40℃~+150℃ |
|---|---|
| Product Material | Hermetic Material |
| Leak Test | 2.5MPa With N2,No Leak |
| Nickel Plated | THICKNESS 2~5μm |
| Salt Spray Resistance | 48h The Rusted Area < 5% |
| Glass | Fused |
|---|---|
| Product Type | Connector |
| Insulator Material | Ceramic |
| Pins | SUH446 STAINLESS STEEL |
| Leak Test | 2.5MPa Water Test, 1 Minute, No Leakage |
| Méthode d'installation | ≥ 200N |
|---|---|
| Matériau du corps | C45 |
| Tab Thickness | Nickelage 3~5μm |
| Dureté de l'écuelle | HA75°±5° |
| Certifications | ROHS |