| Sleeve Hardness | HA 50-55 |
|---|---|
| Dielectric Strength | 3000VAC |
| Plate | 45 Steel |
| Product Type | Electric Vehicle Connector |
| Insulation Material | Glass And Ceramic |
| Traitement de surface | Nickel sans électro |
|---|---|
| Application du projet | Produits industriels |
| Matériel | 45 en acier |
| Rating de la tension | 12V-540V |
| Plage de pression | 2- 5MPa |
| Spécifications de fil | Φ12.5-6mm - Φ27.5-6mm |
|---|---|
| Conception | Verre au joint en métal |
| Type de connexion | Fileté, à bride |
| Pression maximale | 6MPa - 10MPa |
| Matériel | 1215 en acier |
| Currentrating | Up To 10A |
|---|---|
| Productname | Hermetic Seal Connectors |
| Numberofcontacts | 3 |
| Leak Test | 4MPa N2 Pressure No Leak |
| Voltagerating | Up To 500V |
| Matériel | 45 en acier |
|---|---|
| Traitement de surface | nickelage autocatalytique |
| Voltage nominal | 600V |
| Courant évalué | 30A |
| Type de montage | Boulons de fixation des bornes |
| Mounting Style | Screw |
|---|---|
| Burst Test | 5.0MPa |
| Sealing Method | Hermetic Seal |
| Glass Material | ELAN #48 |
| Operating Temperature | Up To 150°C |
| Current Rating | 20A |
|---|---|
| Salt Spray Resistance | 48h |
| Contact Resistance | 2mΩ |
| Burst Test | 5.0MPa |
| Sealing Method | Hermetic Seal |
| Working Voltage | 140V-300V |
|---|---|
| Insulation Material | Glass |
| Electricalinsulation | High |
| Rated Current | 10-30A |
| Pin Finish | Nickel Plating2-5um,Golden Plating 0.1-0.3um |
| O-RING | Ø8.5X1.8 |
|---|---|
| Temperaturerange | -40°C To 125°C |
| Nickel Plating | 2-5um |
| Number Of Contacts | Single |
| Insulator Resistance | 1000MΩ@750VDC |
| Pin Materials | 52 ALLOY |
|---|---|
| Leak Rate | <2x10^-8 Atm Cc/sec |
| Connector Type | Hermetic |
| Connector Shell Material | 12L14 OR 1215 C.F.S |
| Glass Materials | ELAN #13 OR EQUIVALENT |