| Housing Material | 304 STAINLESS STEEL |
|---|---|
| Contact Resistance | 10 MΩ |
| Sealing Method | Glass To Metal Seal |
| Connector Type | Single Pin |
| Thermal Cycle | -60°C ~ +100°C |
| Sealingtype | Hermetic |
|---|---|
| Insulation Resistance | 500MΩ Min |
| OperatiomCurrent | 30AMAX |
| Insulationmaterial | CERAMIC |
| High Sealing Performance | 2.5MPa Does Not Leak |
| Plaquage par contact | Nickel sans électro |
|---|---|
| Test de fuite | 22 MPa avec N2, pas de fuite |
| Type de connecteur | Pour les appareils électroniques |
| Nom du produit | Connecteurs hermétiques d'auget |
| Résistance d'isolateur | 100MΩ@500VDC |
| Thickness | 1-5μm |
|---|---|
| Sealing Method | Hermetic Sealing |
| Working Temperature | -40℃-150℃ |
| Body Material | Cold Rolled Steel |
| Contact Plating | Gold |
| Current Rating | 20A |
|---|---|
| Salt Spray Resistance | 48h |
| Contact Resistance | 2mΩ |
| Burst Test | 5.0MPa |
| Sealing Method | Hermetic Seal |
| Estimation de la température | 105°C |
|---|---|
| Résistance diélectrique | 2500VAC |
| Résistance de vibration | 20G |
| Résistance de contact | 2mΩ |
| Estimation de tension | 1000V |
| Mounting Style | Screw |
|---|---|
| Burst Test | 5.0MPa |
| Sealing Method | Hermetic Seal |
| Glass Material | ELAN #48 |
| Operating Temperature | Up To 150°C |
| Body | 316L Stainless Steel |
|---|---|
| Surfacefinish | Smooth And Clean For Optimal Sealing |
| Pin Material | Alloy 52 |
| Manufacturingprocess | Fusing Glass To Metal Under Controlled Conditions |
| Application | Electrical Feedthroughs, Vacuum Tubes, Sensors |
| Type de montage | bâti de panneau |
|---|---|
| Nom du produit | Connecteur hermétique d'EV |
| Matériel d'isolateur | De verre et en céramique |
| Type de connecteur | Hermétique |
| Série de connecteur | EV |
| Sealing Method | Glass-to-Metal Or Ceramic-to-Metal |
|---|---|
| Cable Length | Customizable |
| Dielectric Withstanding Voltage | 1,500 VAC |
| Mounting Style | Flange, Threaded, Weldable |
| Insulation Material | Glass Or Ceramic |